Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The Cat® 950 GC wheel loader is designed specifically to handle all the jobs on your worksite from material handling and truck loading to general construction and stockpiling. Great machine performance combined with the low owning and operating costs makes the 950 GC the right choice for your business.
Cat® C7.1 engine offers high power density with a combination of proven electronic, fuel, and air systems. Engine emissions…
The proven Cat Z-bar linkage geometry with Performance Series Buckets offer excellent penetration into the pile and high breakout…
Engine Idle Management System (EIMS) and Auto Engine Idle Shutdown (EIS) maximize fuel efficiency by reducing engine rpm after a s…
The spacious cab features easy, intuitive controls and excellent visibility which provides a comfortable working environment for e…
Ladders are standard on both sides of the machine to easily access the platforms. Platforms are equipped with guard- and han…
Grouped service points and sight gauges allow for easy daily maintenance. Convenient access to left, right, and rear of engi…
This optional kit is simple to install compared to other 3rd party payload systems*. On-the-go weighing** for precise load t…
Specification | Value |
Net Power - ISO 9249 | 151 kW |
Engine Model | Cat C7.1 |
Bore | 105 mm |
Stroke | 135 mm |
Displacement | 7.01 l |
Maximum Gross Torque - 1,400 rpm | 1.020 N·m |
Rated Net Power - 2,200 rpm - ISO 9249 | 151 kW |
Rated Gross Power - 2,200 rpm - ISO 14396 | 168 kW |
Maximum Gross Power - 2,000 rpm - ISO 14396 | 171 kW |
Maximum Net Torque - 1,300 rpm | 931 N·m |
Specification | Value |
Operating Weight | 18.676 kg |
Specification | Value |
Bucket Capacities | 2.5-4.4 m³ (3.3-5.75 yd³) |
Specification | Value |
Breakout Force | 147 kN |
Note (1) | **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. |
Static Tipping Load - Full 40° Turn - Rigid Tires** | 11.197 kg |
Static Tipping Load - Full 40° Turn - ISO 14397-1* | 10.503 kg |
Note (2) | *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Specification | Value |
Forward - 1 | 7 km/h |
Forward - 2 | 12.5 km/h |
Forward - 3 | 22 km/h |
Forward - 4 | 34 km/h |
Reverse - 1 | 7 km/h |
Reverse - 2 | 12.5 km/h |
Reverse - 3 | 22 km/h |
Specification | Value |
Steering System - Pump Type | Piston |
Hydraulic Cycle Time - Total Cycle Time | 10.1 s |
Hydraulic Cycle Time - Lower, Empty, Float Down | 2.8 s |
Hydraulic Cycle Time - Raise from Carry Position | 6.1 s |
Implement System - Optional 3rd Function Maximum Flow | 280 l/min |
Implement System - Maximum Pump Output at 2,200 rpm | 248 l/min |
Implement System Pump Type | Piston |
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) | 27.900 kPa |
Implement System - Optional 3rd Function Maximum Pressure @ 70 L/min | 20.680 kPa |
Specification | Value |
Hydraulic Cycle Time - Dump, at Maximum Raise | 1.2 s |
Specification | Value |
Brakes | Brakes meet ISO 3450 |
Specification | Value |
Choices | Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25, L3 (Triangle); 23.5R25, L3 (Bridgestone) |
Specification | Value |
ROPS/FOPS | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
Specification | Value |
Differential - Final Drives - Front | 40 l |
Crankcase | 20 l |
Fuel Tank Size | 290 l |
Differential - Final Drives - Rear | 38 l |
Transmission | 45 l |
Hydraulic Tank | 120 l |
Cooling System | 48 l |
Specification | Value |
B-Pin Height | 4.188 mm |
B-Pin Height - Carry | 655 mm |
Lift Arm Clearance | 3.649 mm |
Centerline of Rear Axle to Edge of Counterweight | 2.001 mm |
Height - Top of ROPS | 3.458 mm |
Height - Top of Exhaust Pipe | 3.596 mm |
Height - Top of Hood | 2.568 mm |
Ground Clearance | 460 mm |
Wheel Base | 3.300 mm |
Centerline of Rear Axle to Hitch | 1.650 mm |
Rack Back - Maximum Lift | 60 ° |
Dump Angle at Maximum Lift | 52 ° |
Rack Back - Carry | 45 ° |
Rack Back - Ground | 40 ° |
Height - Center Line of Axle | 750 mm |
Specification | Value |
Turning Radius - Inside of Tires | 3.419 mm |
Turning Radius - Outside Edge of Counterweight | 6.190 mm |
Turning Radius - Outside of Tires | 6.164 mm |
Width - Over Tires | 2.745 mm |
Learn more information about the Cat 950 GC Wheel Loader.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Ask an Expert today!